Matrix-orbital MOS-AL162F Instrukcja Użytkownika Pobierz pdf (Strona 11)

6.2 Common Features

General Purpose Outputs

Figure 8: GPO Header

Table 6: GPO Pinout

Function

GPO 1

Gnd

A unique feature of the MOS-AL162F is the ability to control relays and other external devices using a

General Purpose Output, which can provide up to 20 mA of current and +5Vdc from the positive side of

the GPO. This is limited by a 240 ohm resistor which is located to the above right of the GPOs as pictured

below in figure 10. If the device, which is being driven by a GPO, requires a relatively high current (such

as a relay) and has an internal resistance of its own greater than 250 ohms, then the 240 ohm resistor

may be removed and replaced with a Jumper.

*Note: If connecting a relay, be sure that it is fully clamped using a diode and capacitor in order to absorb any

electro-motive force (EMF) which will be generated.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 26 27

Brak uwag

Matrix-orbital MOS-AL162F Instrukcja Użytkownika Strona 11