Matrix-orbital LCD/VFD Legacy Instrukcja Użytkownika Strona 7

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 15
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 6
Cursor Blink Off
ASCII 'T', Hex 54, Decimal 84
Syntax 0xFE 0x54
To turn off the blinking cursor at the current position send a command prefix followed by the character 'T'.
Create Custom Character
ASCII 'N', Hex 4E, Decimal 78
Syntax 0xFE 0x4E<character between 0x00 and 0x07><8 bytes>
This command creates a custom character. For the LCD2021 the user can have up to eight custom characters. To execute
this command, send a command prefix followed by the character 'N'. The display will now await the number which identi-
fies the custom character. This number must be between 0x00 and 0x07. When the module determines what character it's
working on, then the user must send 8 bytes. This defines the display character. See Diagram A below for and explanation
of the display character structure.
MSB LSB
*
* *
1 2 3 4 5 Data Byte 1
*
* *
6 7 8 9 10 Data Byte 2
*
* *
11
12 13
14 15 Data Byte 3
*
* *
16
17 18
19 20 Data Byte 4
*
* *
21
22 23
24 25 Data Byte 5
*
* *
26
27 28
29 30 Data Byte 6
*
* *
31
32 33
34 35 Data Byte 7
*
* *
36
37 38
39 40 Data Byte 8
Diagram A
Pixel Layout of Display Characters
General Purpose Output On
ASCII 'V', Hex 56, Decimal 86
Syntax 0xFE 0x56<hex number corresponding to output>
To turn on the general purpose output, send a command prefix followed by the character 'V'. Please note that the output is a
current sink. (Max 20mA)
General Purpose Output Off
ASCII 'W', Hex 57, Decimal 87
Syntax 0xFE 0x57<hex number corresponding to output>
To turn off the general purpose output, send a command prefix followed by the character 'W'.
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
26 27 28 29 30
31 32 33 34 35
36 37 38 39 40
Cursor Line
7
Przeglądanie stron 6
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Komentarze do niniejszej Instrukcji

Brak uwag